After following our nail prep and Attain Strength tutorials, start by applying a thin coat of color over the entire nail avoiding the skin. Attain colors are very pigmented so use thin coats to allow for proper curing.

After you've applied your first coat, cure in the Attain Nail Lamp for a full 60 seconds (simply push the button to start the automatic 60s cycle).

Apply the second coat of color right on top of the cured nail. There is no need to cleanse the tacky layer as it will cure along with the second layer of gel once it is covered.

After you've applied your first coat, cure in the Attain Nail Lamp for a full 60 seconds (simply push the button to start the automatic 60s cycle).

Apply a thin even layer of either Attain Matte or Attain Shine depending on your preference.

After you've applied your first coat, cure in the Attain Nail Lamp for a full 60 seconds (simply push the button to start the automatic 60s cycle).

Using a lint free Attain Wipe and Attain Clean cleanser clean the nail thoroughly to remove the tacky residue. Congrats! You've just completed an Attain Color application.