STEP 01: APPLY ATTAIN ADHESION.
Apply a thin layer of Attain Adhesion to the entire nail plate, being careful to really scrub the product in while avoiding the skin.
STEP 02: CURE THE NAIL.
Cure the nail in the Attain Nail Lamp for 60s. The lamp is auto-programmed to a 60s cycle so all you have to do is insert your hand and push the button. Make sure the nail is completely enveloped in light and keep your fingers just slightly apart.
STEP 03: APPLY A MEDIUM LAYER OF ATTAIN ADHESION.
Apply another layer of Attain Adhesion to the entire nail. This time add a bit more product so you have a medium thickness that is concentrated in a dome shape in the center of the nail. DO NOT CURE.
STEP 04: APPLY ATTAIN STRENGTH.
Sprinkle a small amount of Attain Strength Powder over the entire wet nail surface. Tap the excess back into the jar. When you are finished cure the nail in the Attain Nail Lamp for a full 60s cycle.
STEP 05: CLEANSE THE NAIL.
Using a lint free Attain Wipe and Attain Clean cleanser clean the nail thoroughly to remove the tacky residue.
STEP 06: APPLY TOP COAT.
If you wish you can gently buff the nail to refine any lumps or rough texture and finish by cleansing the nail a second time with a clean wipe and cleanser to remove all dust and debris. If no buffing is needed you can skip this step and apply a thin layer of either Attain Matte or Attain Shine. Cure in the lamp for 60s and cleanse after curing to remove the tacky residue.
STEP 07: ENJOY STRENGTH FOR 2-4 WEEKS.
You have just completed an Attain Strength overlay! Your nails will be protected and reinforced. As the nails grow over then next few weeks you will see space form between the product and the skin. At the about the 2-3 week mark you can follow our backfill tutorial to maintain them.